Printer repairs in Leeds, Bradford and Yorkshire - Photocopiers, printers, plotters, shredders and fax machines

Blog

19/02/2020

Fellowes 325ci shredder with the red attention light flashing, the paper sensors required cleaning both in the main paper feed section and the CD shredding area, a strip down and clean of the optical sensors got the shredder working again. Fellowes shredder service and support Use the...

27/01/2020

Canon Pixma G3500 displaying an error of waste ink counter near full, the printer was cleaned, oiled and reset, this error appeared after the printer had only done 6000 prints. This model of Canon Pixma pritner comes with 7000 pages of black ink  and 6000 colour. Canon error B500...

16/01/2020

HP Designjet T520 plotter with the display stating "There is a problem with the printer or ink system, turn off, then on, if problem persists contact HP" This fault is usually down to either a faulty cartridge or a faulty printhead assembly, start by taking the ink cartridges out and visually...

08/01/2020

Xerox Versalink C405 colour printer with only 45000 prints requiring a new set of paper feed rollers, part number 675K47673, the separation roller had a large flat spot and this was causing random jams in the paper cassette, the 3 rollers in the paper feed kit are identical and can be swapped...

19/12/2019

A Brother MFC-9330CDW with a rip on the hot roller in the fuser unit causing repeat marks on the print outs, the part number for this fuser unit is LY6754001 and can be well over £100 to buy the fuser unit alone, we completed a refubishment on the customers unit on-site for a fraction of...

06/12/2019

A service to a Lexmark MX711 laser printer which also involves installing a maintenance kit, these kits should last 200,000 prints and have several printer parts included, in the kit is a fuser unit, transfer roller, several pick up rollers and also separation rollers, the Lexmark 40X8421...